Jencons, Nova 4 Water
Stills
The Nova 4 has been designed as a simple, low
cost and reliable still. It has a tough stainless steel boiler and
borosilicate glass condenser. Its metal non-corrosive heating element
is protected by a thermostat.
The Nova 4 produces a high quality distillate with
a conductivity of 2 µmho/cm at a rate of 4 litres/hr at 230V
or 2 litres/hr at 110V.
| Specification |
| |
Nova |
| Distillate output, litres/hr -
230V |
4 |
| Distillate output, litres/hr -
110V |
2 |
| Conductivity, µs/cm † |
0.3 |
| Minimum water supply pressure, kg/cm2 |
0.3 |
| Water consumption, litres/hr |
60 |
| Dimensions (hxwxd), mm overall |
440x210 |
| Heaters, kW |
1x2.4 |
| Weight, kg |
2.5 |
| Electrical supply |
110V or 220/240V, 50/60Hz |
|
† Conductivity at 25°C with dissolved
CO2 removed from distillate. Any ultra pure water
in contact with the atmosphere has a conductivity of 1-2 µs/cm
and pH ˜5, due to a small amount of CO2 (0.5ppm)
absorbed from the atmosphere. Deionisers and similar systems
measure conductivity before the water contacts the atmosphere
and absorbs CO2 (during collection and use). As distillates
are already open to the atmosphere before measurements can be
made, it is necessary to remove this CO2 to provide
a comparable conductivity value.
|
| Materials |
|
| Heaters |
Metal (nickel plated) |
| Boiler/Case |
Stainless steel |
| Condenser |
Borosilicate glass |
| Cat. No. |
Description |
Voltage |
| 703-062 |
Nova 4 distillation still |
220/240V |
| 703-063 |
Nova 4 distillation still |
110V |
Autostill™ is the trademark of Autostills™
|